Model:BBM-XRTS-XSP-2X
Traffic Light Controller With Pedestrian Crossing Voice Prompt Pile compared with similar products on the market, it has incomparable outstanding advantages in terms of performance, quality, appearance, etc., and enjoys a good reputation in the market.BBM Traffic Light summarizes the defects of past products, and continuously improves them. The specifications of Traffic Light Controller With Pedestrian Crossing Voice Prompt Pile can be customized according to your needs.
1、Working Voltage:AC220±25% 50Hz±3Hz
2、Rated Power:<20VA
3、Working temperature:-40℃ ~+80℃
4、Viewing Angle>30°
5、Viewing range>300M
6、Life span>50000 Hours
7、 Shell protection grade:IP54
8、Anti-wind speed>150KM/hour
9、red full screen:52LED,green arrow:34LED
10、Red tube wave length:620-625nm;Green tube wave length:503-506nm;
11、Humidity of working environment: 10%~95%RH(No condensation)
12、 Brightness: red, green≥4000cd/ m²
13、All the parameters met the GB14887-2003 standard.
14、Luminescence unit:φ150 150×150 mm
15、Signal pattern: red full screen, green arrow pedestrian indication signal light
Function:
(1) Enter alarm function: connect the red light green and green light lines to the corresponding hub of the main and secondary piles of the equipment; adjust the grating position of the main and secondary columns to make it can receive the infrared light and synchronize with the pedestrian signal light. When the pedestrian light is on, when the pedestrian passes between the main column and the auxiliary column, but the device will not send a voice message; when the pedestrian passes through between the main light and the auxiliary column, blocked the grating infrared,the main pillar and the secondary pillar emit the voice prompt to indicate that the pedestrian has run the red light.and the voice message can be customized.
(2)Considering that someone is running a red light late at night, the alarm sound will disturb the people, the voice prompt switch time can be set through the mobile phone APP. The alarm prompt will be automatically opened at 8:00 am by default, and the alarm will be stopped at 20:00 pm at night, and other functions work normally.
(1) The outer shell is made of aluminum alloy / sheet metal material, which has good oxidation resistance, and the equipment will not fade during the use period.
(2) The total height is 1.2-1.3m, the top consists of red“●”and green“↑”,The frontal height is 1.1-1.2m.
(3) The front display screen is above the sound parts, and the special design ensures that the sound spreads in the specified direction.
(4) The inner side of the prompt column is the grating assembly, the grating is customized for industry, and the low temperature resistant working characteristics are far higher than the ordinary grating. The reaction time is ≤200ms, the transmission distance is farther, the standard 10m, the environmental interference ability is stronger.
(5) The back of the prompt column is the detection board. When the column is faulty, the maintenance board should be used for maintenance.
(6) There is a 6 Pin terminal inside the prompt column to connect the corresponding connecting lines, as follows:
a.The horn wiring hub between the main and secondary columns is connected by a 2*0.5m² cable, so that the voice between the main and secondary columns is synchronized;
b.The red and green light signal lines of the pedestrian signal light are connected to the red light and green light wiring seat of the main and auxiliary columns through a 3*1.5m² cable, so that the traffic lights on the main and auxiliary columns can keep synchronized with the pedestrian signal light;
c.The ground wire of the display switch power supply is connected to the wiring seat through a single core 2.5 m² yellow and green wire, and is then reliably grounded from the wiring block.
(7) Shell protection grade: IP53; high resistance and low temperature performance: -30℃ ~ + 65℃.
(1) Pedestrian crossing voice warning pile is an auxiliary equipment for pedestrian crossing. There are main piles and secondary piles, which are installed on both ends of the pedestrian zebra crossing .Visually and audibly to remind the pedestrians not to run the red light and pass the road safely .According to the pedestrian light signal. To urge citizens to abide by traffic laws and regulations,develop good civilized travel habits, and ensure road traffic safety.
(2) When the pedestrian light is green, the pedestrian passes between the main pillar and the secondary pillar, but the device will not send a voice prompt; When the pedestrian light passes red, the pedestrian passes between the main pillar and the secondary pillar, blocked the grating infrared,the main pillar and the secondary pillar emit the voice prompt to indicate that the pedestrian has run the red light.
Product wiring diagram:
Position map of the base mounting hole:
Product features
(1) There is no need to connect the main power supply of 220V, but only the need to connect the pedestrian red and green light from the pedestrian signal light to the corresponding wiring seat of the prompt pile.
(2) The debugging adopts the wireless operation of mobile APP, and all Settings can be completed without opening the rear maintenance door.
a.Volume size
b.Switch time
c.Changes to the voice content
(3) Convenient maintenance: when the pedestrian signal light is connected to the prompt pile, it passes through the switch with the indicator light to know the instant state of the signal.
(4) Hidden bottom seat design: after the installation of the product, you can not see the stud on the base flange, beautiful and generous.
(5) There are signal lights before and after: pedestrians who do not crossed the zebra crossing and are already in the zebra crossing can know the status of the pedestrian signal light in the first time.
(6) Patch LED display: the Angle is larger than the traditional plug-in display, pedestrians can see the content on the display on the front side.
(7) Display content update: you can use the mobile APP to change the content on the display in real time, without the PC to change.
(8) The equipment control card is equipped with the interface between the access spike and the floor tile. There is no need for another external power supply, no need to add another controller control, and the display color is automatically converted with the pedestrian signal light.
(9) Increase the temperature and humidity control circuit, when the temperature in the equipment reaches the set temperature and humidity, automatically start the fan cooling and exhaust (the original Taiwan built quasi fan).
(10) Control the motherboard and mobile phone APP have obtained the software copyright.
Leave A Message
Please fill out and submit the form below, we will contact you in 24 hours, thank you!
Recommended